29
2025
-
05
What does the controller do when the motor is overloaded?
The controller will limit the output current to prevent it from exceeding the motor's maximum allowable value.
Current Limit ：
The controller will limit the output current to prevent it from exceeding the motor's maximum allowable value.
Slow Down or Stop the Motor ：
The controller may automatically reduce the motor speed, or stop the motor completely in case of a serious overload.
Alarm Signal ：
Issue an alarm signal to notify the operator that the motor is overloaded and requires inspection or adjustment.
Power Cut-off ：
In some cases, if the overload persists, the controller may cut off the power to prevent damage to the motor and the controller itself.
Thermal Protection ：
If the motor overloads, causing a temperature increase, the thermal protection device (such as a thermal relay) will trigger, cutting off the power to prevent the motor from overheating.
Reset Function ：
After the overload condition is cleared, the controller may need to be manually or automatically reset to restore normal motor operation.
Record Fault Information ：
The controller may record details of the overload event, including time, duration, and current value, for subsequent analysis and maintenance.
Soft Start ：
When restarting the motor, the controller may use a soft start strategy, gradually increasing the current to avoid overloading again.
Load Adjustment ：
The controller may adjust the motor load to keep it operating within a safe range.
The purpose of these measures is to ensure that the motor is not damaged by overload, and also to protect the entire
Get Company Product Information
Contact Information
Address: No. 39, Lane 1059, Samsung Avenue, Wenling City, Taizhou City, Zhejiang Province
Telephone:0576-89687228
Fax: 0576-89687229
Website:http://www.leli.asia
Email:sales@leli.asia
Cooperation and Communication
Inquire Now
You can leave us a message for any questions, and our professionals will reply to you. Please be sure to fill in the correct contact information!
Tel:0576-89687228